ASE 150 Operator’s Manual
20 Doc. 065207-02 9/08
2.5 Preprogrammed Methods
To help you quickly produce results with the ASE 150, Dionex provides nine
preprogrammed methods. These methods are designated by three-letter
abbreviations (see the table below).
The remainder of this section lists the recommended solvent and the operating
conditions for each preprogrammed method. You cannot edit or delete a
preprogrammed method.
Preprogrammed Method Method Name
Semivolatiles BNA
Total Fat (crude) FAT
Chlorinated Herbicides HRB
Organochlorine Pesticides OCP
Organophosphorous Pesticides OPP
Polychlorinated Biphenyls PCB
Dioxins and Furans PDF
Polymer Additives PPE
Total Petroleum Hydrocarbons TPH
BNA (Semivolatiles) Method Parameters
Solvent MeCl
2
/Acetone (1:1, v/v)
Temperature 100 °C
Static Time 5 min
Rinse Volume 60%
Purge Time 100 sec
Static Cycle 1
Cell Type Stainless steel
To Next Page
Loading...