Dionex ASE 150 - Page 31

2 • Description
Doc. 065207-02 9/08 23
PPE (Polymer Additives) Method Parameters
Solvent 2.5% Cyclohexane in Isopropyl
Alcohol
Temperature 140 °C
Static Time 3 min
Rinse Volume 100%
Purge Time 60 sec
Static Cycle 3
Cell Type Stainless steel
TPH (Total Petroleum Hydrocarbons) Method Parameters
Solvent MeCl
2
/Acetone (1:1, v/v)
Temperature 175 °C
Static Time 5 min
Rinse Volume 60%
Purge Time 100 sec
Static Cycle 1
Cell Type Stainless steel