DIS DDS 5900 - Page 54

Danish Interpretation Systems User Manual
User Manual DDS 5900
54
<volume>Thevolumeoftheloudspeakersrangingfrom‐41to0.Thevalue‐41indicatesOff,whereasvaluesfrom‐
0to0indicatesattenuationindB.4

10.3.2.2
10.3.2.3
10.3.2.4
10.3.2.5
Line input 1 level
line_input_level_1<le
velo
vel><CR>
Le flineinput1signal.
<level>Theleveloflineinput1rangesfrom‐41to0.Thevalue‐41indicatesOff,whereasvaluesfrom‐40to0
ndicatesattenuationindB.i

Line output level (A-D)
line_output_level<output><level><CR>
Adjusttheleveloflineoutputsignal.
outp< ut>Indicateswhichoutputisbeingcontrolled.Possiblevalues:‘A’,‘B’,‘C’,‘D’.
<level>Theleveloflineoutputrangesfrom‐41to0.Thevalue‐41indicatesOff,whereasvaluesfrom‐40to0
ndicatesattenuationindB.i

Define audio path
audio_path<path><on/off><CR>
hiscomm o s t tT anddefinesaudi connection in hesys em.
<path> Indicates which connection is being controlled. Possible values: 'mic_to_speaker', 'mic_to_floor',
nein_1'li _to_speaker','linein_1_to_lineout_A',‘linein_1_to_floor’.
<on/off>Indicates,whethertheaudioisbeingroutedfrommicrophones/lineinput_1 to
peakers/lineoutput_A/floor.s

Audio status complete
audio_status_done<CR>
hiscommandterminatesaudiostatusstreaming.T
