Operation Section
98
How to Fix Forklift to a Carrier
1. The rope/chain must have sufficient length for
fixing.
2. Park the vehicle on a level ground.
3. Set the mast vertically. Lower the fork or
attachment to the lowest position.
4. Set all the operating devices to Neutral
Position. Turn OFF the start switch.
5. Check that the parking brake lamp is on, chock
the wheels with blocks (C).
6. Fix the mast top B and rear tow pin A with
towing hooks, as shown in the figure below.
7. If the forklift is without mast, fix the rear tow pin
A and front cowl D with towing hooks, as
shown in the figure below.
To Next Page
Loading...
