Doosan B25X-7 PLUS - Getting Started

Operation Section
52
Getting started
Turning the unit on/off
1. Turn your car’s ignition key to ACC or IGN (ON)
position.
2. Press the POWER button to turn the power on.
• If the source is ready, playback also starts.
• To turn on the power directly
By connecting an USB into the USB port or
pressing the BAND, MODE (while the USB is
connected), you can also turn on the power and
the unit then plays.
3. When power is on, press and hold the POWER
button to turn power off.
Adjusting volume directly
1. Turn the VOLUME dial to control volume.
• Available volume range: 00 (mute) ~ 41.
Muting the sound quickly
1. Press the MUTE button to turn mute on. "MUTE"
will flash on the display and mute the sound.
2. Press the MUTE button again or turn VOLUME
dial to restore sound.
Setting the sound
1. Press MENU button to enter the Settings menu
mode.
• After entering MENU mode, press MENU button
to return to the previous item.
2. Turn VOLUME dial to select the "SOUND" or
"EQUALIZER" as below, then press this dial;
SOUND ↔ EQUALIZER ↔ BLUETOOTH ↔
DAB ↔ SYSTEM ↔ PREVIOUS.
• SOUND: sets the sound mode
• EQUALIZER: selects the equalizer style.
3 Turn VOLUME dial to select the desired Sound
setting mode, then press this dial.
• BASS: sets the bass sound level. (-5 ~ +5)
• MIDDLE: sets the middle sound level. (-5 ~ +5)
• TREBLE: sets the treble sound level. (-5 ~ +5)
• BALANCE: sets the sound balance between the
right and left speakers. (LEFT 15 ~ RIGHT 15)
• EQUALIZER: selects the one of the 7 EQ styles
(EQ OFF, POP, ROCK, COUNTRY, VOICE,
JAZZ, CLASSIC).
• PREVIOUS: Return to previous menu screen..
4 Turn VOLUME dial to adjust the value of the
level, balance or style, then press this dial.