Operation Section
67
Troubleshooting
Common
Symbol Possible causes Possible remedies
Sound is not generated. MUTE is set to ON. Set MUTE to OFF. (refer to 6 page)
Noise
There is an electromagnetic-wave
generator near the unit or its electrical
lines.
Keep an electromagnetic-wave
generator s away from the unit and the
wiring of the unit. In case the noise
cannot be eliminated due to the wiring
harness of the car, consult your dealer.
No sound from speaker(s) Balance setting is not appropriate. Readjust balance. (refer to 6 page)
Radio/DAB (option)
Symbol Possible causes Possible remedies
A radio broadcast cannot
be received.
The region of radio reception is not
selected correctly.
Retry the setting the region of radio
reception correctly. (Refer to page 9)
Seeking takes too long.
The auto antenna (aerial) will not go
up.
Check the connection of the power
antenna (aerial) control lead.
Poor reception or noise Out of receiving area.
The strength of radio waves may vary
depending on the location, and
reception may worsen due to burial.
If the reception is poor, reselect a good
station with the auto tuning function or
the search function.
Preset stations cannot be
stored
Auto seeking may take some time.
Change to auto seeking, and
proceedwith seeking again.
To Next Page
Loading...
