Information Section
3
Operation
The Operation Section is a reference for the new
operator and a refresher for the experienced one.
This section includes a discussion of gauges,
switches, lift truck controls, attachment controls,
transportation and towing information.
Photographs and illustrations guide the operator
through correct procedures of checking, starting,
operating and stopping the lift truck.
Operating techniques outlined in this publication are
basic. Skill and techniques develop as the operator
gains knowledge of the lift truck and its capabilities.
Maintenance
The Maintenance Section is a guide to equipment
care. The illustrated, step-by-step instructions are
grouped by servicing intervals. Items without
specific intervals are listed under "When Required"
topics. Items in the "Maintenance Intervals" chart
are referenced to detailed instructions that follow.
Maintenance Intervals
Use the service hour meter to determine servicing
intervals. Calendar intervals shown (daily, weekly,
monthly, etc.) can be used instead of service hour
meter intervals if they provide more convenient
servicing schedules and approximate the indicated
service hour meter reading. Recommended service
should always be performed at the interval that
occurs first.
Under extremely severe, dusty or wet operating
conditions, more frequent lubrication than is
specified in the "Maintenance Intervals" chart might
be necessary.
Perform service on items at multiples of the original
requirement. For example, at "Every 500 Service
Hours or 3 Months", also service those items listed
under "First 50 - 100 Service Hours or a Week" and
"Every 10 Service Hours or Daily".
Environment Management
Doosan Industrial Vehicle is ISO 14001 certified
which is harmonized with ISO 9001. Periodic
ENVIRONMENTAL AUDITS & ENVIRONMENTAL
PERFORMANCE EVALUATIONS have been made
by internal and external inspection entities.
LIFECYCLE ANALYSIS has also been made
through out the total product life.
ENVIRONMENT MANAGEMENT SYSTEM
includes DESIGN FOR ENVIRONMENT from the
initial stage of the design. ENVIRONMENT
MANAGEMENT SYSTEM considers environmental
laws & regulations, reduction or elimination of
resource consumption as well as environmental
emission or pollution from industrial activities,
energy saving, environment friendly product
design(lower noise, vibration, emission, smoke,
heavy metal free, ozone depleting substance free,
etc.), recycling, material cost reduction, and even
environmentally oriented education for the
employee.
To Next Page
Loading...
