Maintenance Section
135
Every 500 Service Hours or 3 Months
You must read and understand the warnings and instructions contained in the Safety section of this manual,
before performing any operation or maintenance procedures.
Tilt Cylinders
Chassis Pivot Eyebolts - Lubricate
1. Remove floor plates.
2. Lubricate pivot eyebolts, one fitting on each tilt
cylinder.
3. Check the pivot eye pins for loose retainer bolts
and wear.
Mast Pivot Eyes - Lubricate
1. Lubricate the mast pivot eyes, one fitting on
each side of the mast.
2. Check the mast pivot eye pins for loose retainer
bolts and wear.