Operation Section
92
Parking the Lift Truck
NOTICE
Parking or storage of electric lift trucks outdoor can
cause lift truck system damage or failure.
Park or store all electric lift trucks inside a building
to protect electrical system from moisture damage.
When leaving the operator’s station, park the lift
truck in authorized areas only. Do not block traffic.
Park the lift truck level, with the forks lowered and
the mast tilted forward until the fork tips touch the
floor. Block the drive wheels when parking on an
incline.
1. Apply the service brake to stop the lift truck.
2. Move the directional control forward/reverse
switch into NEUTRAL.
3. The parking brake is automatically engaged
with a “clunk” after the vehicle stops.
4. Tilt the mast forward and lower forks to the floor.
5. Turn key switch to OFF and remove the key.
PARKING BRAKE (EM)
To Next Page
Loading...
