Maintenance Section
129
9. Inspect the drive axle housing and the ground
for oil leaks. Refer to “Drive Axle” in “When
Required” section, if an oil leak is found.
10. Adjust the operator’s seat.
11. Adjust the steering wheel to a comfortable
position.
12. Move the directional control forward/reverse
switch to NEUTRAL.
13. Turn the key switch to ON.
14. Check the LCD display for battery discharge
status. A fully charged battery will be displayed
on the LCD display.
15. Check the operation of parking brake, service
brake, controls and other devices that may be
equipped on your lift truck.
To Next Page
