Operation Section
90
Unloading Lift Truck
1. Move the lift truck into the unloading position.
2. Tilt the mast forward only when directly over the
unloading area.
WARNING
Do not tilt the mast forward with the load unless
directly over the unloading area, even if the
power is off.
3. Deposit the load and back away carefully to
disengage the forks.
4. Lower the carriage and forks to either travel
position or park position.
Lifting Drums or Round Objects
1. Block drums or round objects. Tilt mast forward
and slide fork tips along the floor to get under
the load.
2. Tilt the mast back slightly until the load is
cradled on the forks before lifting.
3. Lift the load to the travel position.
To Next Page
