SmartDate 5 06/08
TABLE OF CONTENTS
5.12 Print Quality Problems 5-29
5.12.1 Poor Print Quality (when in DRS Mode) 5-30
5.12.2 Faded print 5-30
5.12.3 Faded on one side 5-31
5.12.4 Blurred edges 5-31
5.12.5 Missing lines perpendicular to printhead 5-31
5.12.6 Text missing at start of print 5-32
5.12.7 Text missing at end of print 5-32
5.12.8 Print rubs off 5-32
5.12.9 First Dots Missing or Ragged 5-33
5.12.10 Last Dots Missing or Ragged 5-33
5.12.11 Elongated or compressed print 5-33
5.12.12 Double printing 5-34
5.12.13 Prints occur on every other product (or less) 5-34
5.12.14 Overlapping prints 5-34
5.12.15 Cropped Prints 5-34
5.13 Job Selection Problems 5-35
5.13.1 Selecting a Job 5-35
5.13.2 Host PC 5-35
5.13.3 Image corruption problems 5-35
5.14 Checking Database Information 5-36
5.14.1 Local 5-36
5.14.2 Host 5-36
5.14.3 Database mode 5-36
5.15 Communication Problems 5-37
5.15.1 Communications Do Not Work 5-37
5.15.2 Selecting RS-232/RS-485 operation 5-38
5.15.3 RS-485 Node Numbers and Network ID 5-38
5.15.4 RS-232 (NGPCL) Communication 5-38
5.15.5 Networking Issues 5-39
5.15.6 Communication ports 5-39
5.15.7 Communications connection 5-39
5.15.8 Broken wires or shorts 5-39
5.16 Disaster Recovery 5-40
5.16.1 Recovery Using CoLOS Create Pro 5-41
5.16.2 Recovery Using CoLOS Control 5-42
5.16.3 Recovery Using SmartTouch 5-43
5.16.4 Recovery using the PC Tools Application 5-43
5.16.5 Recovery using Compact Flash 5-43
6 Recommended Spares 6-1
6.1 Consumables 6-1
6.2 Replacement Parts 6-1
6.3 Spares Kits 6-2
To Next Page
Loading...