Supplement for Infinity Delta Series Software
70 Supplement – Infinity
®
Delta Series Software VF10.1
MEDIBUS.X Protocol Support
MEDIBUS.X ventilators and anesthesia devices send parameters, settings, text messages or modes, and
waveforms to the network via the Delta series monitor.
Supported MEDIBUS.X Waveforms
The Delta monitor can simultaneously display the
following three waveforms when using the
MEDIBUS.X protocol.
NOTE
Delta series software VF10 and IDS software VF6.0 or higher support the MEDIBUS.X protocol for
integrating external device information into the monitor system and Infinity network.
NOTE
The Patient Category and Patient Category-specific settings align with the configured patient category
on the Delta monitor and are independent of that selected on the source device. The selected patient
category determines specific monitoring settings for the selected patient. Make sure you select the
appropriate patient category for the monitored patient on the Delta and the MEDIBUS X. device.
NOTE
The unit of measure displayed for each
parameter, waveform, and trend aligns with the
configured unit of measure on the Delta monitor
and is independent of that displayed on the
source device.
Waveform
label
Description Unit of measure
Paw Airway
pressure
cmH2O
Flow Inspiratory and
expiratory flow
L/min
CO2 Carbon
dioxide
concentration
mmHg, kPa,%
To Next Page
Loading...
