Supplement for Infinity Delta Series Software
94 Supplement – Infinity
®
Delta Series Software VF10.1
Monitoring Accessories
Infinity PiCCO Pod
Mainstream CO
2 Module and Sensor
Physical attributes
Size (H x W x D) 110 x 205 x 40 mm (4.3 x 8.1 x 1.6 in)
Weight <
0.9 kg (1.9 lb)
NOTE: Weight includes four transducer cables and excludes mounting clamp and mounting rod.
User Controls Fixed keys (C.O. Start, IBP Zero)
Connections 4 invasive pressures, C.O., single cable connecting pod to monitor
Degree of protection against
ingress of water
IPX1 (protected against harmful effects of dripping water) per IEC 60529
Electrical specifications
Power source Powered directly from the monitor
Protection against electric
shock
Type CF
Mode of operation Continuous
Defibrillation protection Yes
Environmental requirements
Temperature range Operating: 5 to 45 °C (41 to 113 °F)
Storage: –40 to 70 °C (–40 to 158 °F)
Relative humidity Operating:10 to 95%, non-condensing
Storage: 10 to 95% (with packaging)
Atmospheric pressure Operating:485 to 795 mmHg (65 to 106 kPa)
Storage: 375 to 795 mmHg (50 to 106 kPa)
Physical specifications
Size (H x W x D) Module: 150 x 95 x 43 mm (5.9 x 3.7 x 1.7 in)
Sensor: 32 x 55 x 22 mm (1.26 x 2.17 x 0.87 in)
Weight Module: 0.3 kg or less (0.66 lb or less, without sensor connected)
Sensor: 30 g or less (0.066 lb or less, without cable)
Cable length 2.5 m (98.4 in)
Connections Module: Dräger mainstream CO
2 sensor port, SpO2 input port
Cuvette internal volume
(dead space)
Adult 6.7 cm
3
(0.41 in
3
)
Pediatric 4.6 cm
3
(0.28 in
3
)
Cuvette effective dead space
volume
Adult 4.3 cm
3
(0.26 in
3
)
Pediatric 1.9 cm
3
(0.12 in
3
)
Protection against liquid
ingress
Module: IPX1 (protected against harmful effects of dripping water) per
IEC 60529
Sensor: IP64 (dust-tight, protected against splashing water) per IEC
60529
Electrical specifications
Power source Powered directly from monitor
To Next Page
Loading...
