Dräger Infinity Delta Series - Page 76

Supplement for Infinity Delta Series Software
76 Supplement – Infinity
®
Delta Series Software VF10.1
Anesthesia Parameters
Parameter Bedside
monitor
label
Bedside and
Infinity
network
units of
measure
Where locally displayed Former
label
Peak inspiratory
pressure
PIP cmH2O • Paw (Flow and
Volume) parameter box
• Show All Parameters
Mean airway
pressure
Pmean cmH2O MAP
Positive end-
expiratory pressure
PEEP cmH2O
Respiratory rate RR /min • Vent (Flow and
Volume) parameter box
• Show All Parameters screen
RRv
Inspiratory carbon
dioxide concentration
inCO2* mmHg,
kPa,%
• etCO2* parameter box
• Show All Parameters screen
CO2*
End-tidal CO2
concentration
etCO2* mmHg,
kPa,%
MAC multiple derived
from expiratory
concentrations
xMAC
NOTE: may
appear as
MAC exp on
the network
• Agent parameter box
• Show All Parameters screen
MAC
Inspiratory oxygen
fraction
inO2
NOTE: may
appear as
FiO2 on the
network or
source
device
%•MultiGas parameter box
• Show All Parameters screen
NOTE: in the Show All Param-
eters screen, inO2 displays as
FiO2*
iO2
End-tidal oxygen
concentration
etO2 % • MultiGas parameter box
(when MultiGas is enabled)
• O2/N2O parameter box (when
MultiGas is disabled)
• Show All Parameters screen
Respiratory rate
based on carbon
dioxide measurement
RRc* /min • etCO2 parameter box