47
Holiday 2 N Holiday 2 N Holiday 2 N Holiday 2 N
Holiday 3 N Holiday 3 N Holiday 3 N Holiday 3 Y
Holiday 4 N Holiday 4 N Holiday 4 N Holiday 4 N
Autoarm N Autoarm N Autoarm N Autoarm N
Autodisarm N Autodisarm N Autodisarm N Autodisarm N
Holiday Group #3 - Is programmed with the following day 1225 (December 25)
In this example the Main PGM output will activate 3 times during the day, Monday to Friday at 8:30
AM, 12:00 PM, 12:30 PM for ten seconds each time (this was done by programming the PGM
output pulse timer to 10 instead of leaving it at 00). This output will also activate for December 25
(1225) at 5:00 PM for 10 seconds regardless of what day of the week it is. PC4204 relay number 2
will activate on the same days (as well as December 25) and at the same time but will remain on
until the programmed End Time occurs. This was accomplished by programming 00 into the PGM
output Pulse Timer section for that output.
Holiday Schedules are used by the panel to provide exceptions to the scheduled events. Open/
Close Suppression, Date Schedules, and Arm/Disarm Scheduling are capable of following Holiday
Schedules. There a re 4 Holiday groups that can have as holidays programmed as there are days
in the year. Select the Holiday group to be edited (1-4) and the display will prompt with “Enter
Date”. This is a 4 digit entry for the month and day (MM/DD). Once the date has been entered the
year will be auto programmed for the selected date. If the date programmed has not occurred yet
for the present year then the present year will be auto inserted into the date. If the date has
already occur for the year then the next year will be auto inserted. Once a Holiday Schedule has
occurred the holiday will be erased from memory allowing for a new schedule to be placed into
the programming section.
Sections to be programmed for Holiday Schedules are
Holiday Group 1-4 - default is 1
Date - There can be up to 366 (leap year) days programmed into each of the Holiday
groups
An Example of Holiday Scheduling is:
Date Schedule 04 is programmed with
Interval 1 Interval 2 Interval 3 Interval 4
Start Time 0800 Start Time 1800 Start Time 2200 Start Time 2200
End Time 0801 End Time 9999 End Time 9999 End Time 9999
Sunday N Sunday N Sunday Y Sunday N
Monday Y Monday Y Monday N Monday N
Tuesday Y Tuesday Y Tuesday N Tuesday N
Wednesday Y Wednesday Y Wednesday N Wednesday N
Thursday Y Thursday Y Thursday N Thursday N
Friday Y Friday Y Friday N Friday N
Saturday N Saturday N Saturday Y Saturday N
Holiday 1 N Holiday 1 N Holiday 1 N Holiday 1 N
Holiday 2 Y Holiday 2 Y Holiday 2 N Holiday 2 Y
Holiday 3 N Holiday 3 N Holiday 3 N Holiday 3 N
Holiday 4 N Holiday 4 N Holiday 4 N Holiday 4 N
Autoarm N Autoarm Y Autoarm Y Autoarm Y
Autodisarm Y Autodisarm N Autodisarm N Autodisarm N
Holiday Schedule 02 is programmed with the following day: 1225
Arm/Disarm Schedule 05 is programmed with the following data.
Schedule Number - 04
Partition 1 - Y Partition 5 - N
Partition 2 - Y Partition 6 - N
Partition 3 - N Partition 7 - N
Partition 4 - N Partition 8 - N
PC4204 # 10 output number 3 this programmed as a Date Schedule Output with the pulse timer
programmed as 00.
SYSTEM AREA
EVENT SCHEDULING
HOLIDAY SCHEDULE
(2)
To Next Page
Loading...
