48
In this example Partition one and two will Autodisarm Monday to Friday at 8:00 AM and Autoarm at
6:00 PM Monday to Friday. On Saturday and Sunday the partition will autoarm at 10:00 PM.
Interval 4 is programmed to activate the schedule on 1225. When December 25 occurs the
partition will Autoarm at 10:00 PM regardless of the day of the week.. Because interval 1 and 2
follow holiday schedule number 2 as well the programmed events will not occur on that day.
PC4204 #10 output #3 will activate whenever following the same pattern as the autoarming and
auto disarming schedule does.
Note: Be sure the system Time and Date are set before programming Holiday schedules.
Arm/Disarm Scheduling is used by the panel to control when a partition will Auto Arm or Auto
Disarm. There are 50 schedules that may be used to program when the Auto Arming/Disarming
will occur. Once the schedule is selected the display will show “Enter Sch.#” on the top line of the
display. This is the Date Schedule that the partition(s) that are selected will follow for the Auto Arm
or Auto Disarm schedule. Next the display will prompt to select the partition(s) that are to be
enabled on this schedule. Used the [<][>] keys to scroll the to the partition(s) to be selected.
Press [Q] to changed the toggle option from “N” to “Y”.
Sections to be programmed for Arm/Disarm Scheduling are:
Date Schedule 01-99 - Default 01
Partition Mask - Default all off.
An Example of Auto Arm/Disarm Scheduling is:
Arm/Disarm Schedule 25 programmed with
Date Schedule 11
Partition 1 - Y Partition 5 - N
Partition 2 - N Partition 6 - N
Partition 3 - N Partition 7 - N
Partition 4 - N Partition 8 - N
Date Schedule 25 programmed with
Interval 1 Interval 2 Interval 3
Start Time 1830 Start Time 0830 Start Time 1030
End Time 1831 End Time 0831 End Time 1031
Sunday N Sunday N Sunday Y
Monday Y Monday Y Monday N
Tuesday Y Tuesday Y Tuesday N
Wednesday Y Wednesday Y Wednesday N
Thursday Y Thursday Y Thursday N
Friday Y Friday Y Friday N
Saturday N Saturday N Saturday Y
Holiday 1 N Holiday 1 N Holiday 1 N
Holiday 2 N Holiday 2 N Holiday 2 N
Holiday 3 N Holiday 3 N Holiday 3 N
Holiday 4 N Holiday 4 N Holiday 4 N
Autoarm Y Autoarm N Autoarm Y
Autodisarm N Autodisarm Y Autodisarm N
In this example Partition 1 will Autoarm Monday to Friday at 6:30 PM and Auto Disarm Monday to
Friday at 8:30 AM On Saturday and Sunday the partition will autoarm at 10:30 PM.
Note: For Auto Arming and Auto Disarming schedule to function on a partition the following
toggle options must be enabled:
• A Date Schedule must be programmed with Autoarm or Autodisarm enabled (Do Not Program
A Single Interval With Autoarm And Autodisarm Enabled).
• Partition toggle option “Autoarm /Dis.” must be enabled.
• User Function toggle option “Auto Arm” must be enabled for “Schedule Arm” to function. The
Auto Arm toggle option has no effect on the “Sched. Disarm” toggle option. To disable a
scheduled disarm only “Sched. Disarm” has to be disabled.
• User Function Toggle option “Schedule Arm” or “Sched. Disarm” must be enabled.
SYSTEM AREA
EVENT SCHEDULING
ARM/DISARM SCHED
(3)
To Next Page
Loading...
