Press (4) for 2 seconds: the instrument panel
will restore default values for the selected Riding
Mode, and will display the following for 2 seconds:
- the flashing dashes “- - - - - - -” in the Menu
- the flashing symbol “-” instead of the values for
DTC and ABS
- the flashing arrow next to the selected riding
mode
Then, the instrument panel will display the steady
indication “DF - OK” within the Menu for another 2
seconds, with the steady symbol “-” instead of the
values for DTC and ABS.
these 2 seconds, the instrument panel displays
the parameters with the Riding Mode default values,
going back to the previous page.
During this phase, to quit without editing the
currently-set level, keep (2) pressed for 2
seconds.
Fig 55
Fig 56
103
To Next Page
Loading...
