Ducati MULTISTRADA 950 - ABS Enabling;Disabling

ABS enabling/disabling
This Function allows disabling or enabling the ABS
system without entering the  Menu.
Note
“Manual” disabling and enabling of the ABS is
only possible in ENDURO Riding Mode.
If the ABS is enabled, the instrument panel shows
“ABS-ON”.
Once "ABS-ON" is displayed, press  (4) to
disable the ABS.
Note
Vehicle speed must be below or equal to 5 km/
h (3 mph) for activating the ABS disabling procedure;
if it is not so, you can only scroll the functions of the
Menu using  (1) and (2).
When pressing  (4) within the Menu, “WAIT …”
is displayed for 2 seconds. During this time, Menu
scrolling via  (1) and (2) is disabled.
When system is disabled, “ABS-OFF” is displayed,
the ABS light (10, Fig 9) turns on to indicate that the
ABS is disabled and  (1) and (2) are enabled.
If the ABS is disabled, the instrument panel shows
“ABS-OFF” and ABS (warning light 10, Fig 9) on.
Once "ABS-OFF" is displayed, press  (4) to
enable the ABS.
Note
Vehicle speed must be below or equal to 5 km/
h (3 mph) for activating the ABS enabling procedure;
if it is not so, you can only scroll the functions of the
Menu using  (1) and (2).
1
24
Fig 41
88