Clutch lever
Pull lever (1) towards the handgrip to activate the
clutch.
The system is hydraulically operated and you just
need to pull the lever gently.
The brake lever has a dial adjuster (2) for adjusting
the distance between lever and twistgrip on the
handlebar.
The lever distance can be adjusted through 10 clicks
of the dial (2).
Turn clockwise to increase lever distance from the
handgrip. Turn the adjuster counter clockwise to
decrease lever distance.
Before using these controls, thoroughly read
instructions under paragraph "Moving
Set clutch lever when motorcycle is stopped.
Fig 134
183
To Next Page
Loading...
