Instantaneous fuel consumption
(CONS.)
The instrument panel calculates and shows vehicle
instant fuel consumption.
Instant fuel consumption is displayed followed by
“CONS.” and the set unit of measurement (litres /
100 Km or mpg UK or mpg USA).
The calculation is made considering the quantity of
fuel used and the distance travelled during the last
second.
Value is expressed in the set unit of measurement:
litres / 100 Km or mpg UK or mpg USA.
The active calculation phase only occurs when the
engine is running and the vehicle is moving (times
when the vehicle is not moving when speed is equal
to 0 and/or when the engine is are not
considered).
During the phase when no calculation is
three steady dashes “ - - . - ” are displayed as a value
of instantaneous consumption.
Note
It is possible to change the units of
measurement for "Consumption" (both average and
instantaneous together) through the Menu
using the “UNITS SETTING” function.
Fig 33
81
To Next Page
Loading...
