Residual range (RANGE)
This function displays the range according to the
remaining fuel in the tank.
The mi or km value for the RANGE (residual range) is
displayed with “RANGE” indication and unit of
measurement (mi or km).
When the reading exceeds the maximum value (999
km or 621 mi), distance is reset and the meter
automatically counting from 0 again.
If there is any function fault, the instrument panel
will display three flashing dashes “- - -”.
If the instrument panel is not receiving RANGE
information, a string of three steady dashes "- - -" is
displayed.
If the instrument panel does not receive any
information on the unit of measurement, the default
unit of measurement is displayed flashing.
Fig 35
84
To Next Page
Loading...
