EasyManua.ls Logo

Ducati MULTISTRADA 950 - Braking System Description

Ducati MULTISTRADA 950
293 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
 data
Maximum speed in any gear should be reached only
 a correct running-in period with the motorcycle
properly serviced at the recommended intervals.

Failure to follow these instructions releases
Ducati Motor Holding S.p.A. from any liability
whatsoever for any engine damage or  engine
life.
Spark plugs
Make: NGK.
Type: MAR9A-J.
Fuel system
BOSCH electronic injection.
Type of  body: cylindrical with full Ride-by-
Wire system.
Diameter of  body: 53 mm (2.09 in).
Injectors for  body cylinder: 1.
Holes for  body injectors: 10.
Fuel supply: 95-98 RON.

The motorcycle is only compatible with fuel
having a maximum content of ethanol of 10% (E10).
Using fuel with ethanol content over 10% is
forbidden. Using it could result in severe damage to
the engine and motorcycle components. Using fuel
with ethanol content over 10% will make the
warranty null and void.
Brakes
Separate-action anti-lock braking system operated
by hall-type sensors mounted to each wheel with
phonic wheel detection: ABS can be disabled.
FRONT
Semi-floating drilled twin-disc.
Braking material: stainless steel.
Carrier material: stainless steel.
Disc diameter: 320 mm (12.60 in).
Front brake disc thickness: 4.5 mm (0.18 in).
Disc thickness (maximum wear): 4 mm (0.16 in).
Braking  265 sq.
cm (41.07 in
2
).
Hydraulically operated by a control lever on
handlebar right-hand side.
278

Table of Contents

Related product manuals