Ducati MULTISTRADA 950 - Trip Meter 2 (TRIP 2)

Trip meter 2 (TRIP 2)
The trip meter counts and displays the 
distance covered by the vehicle with the set unit of
measurement (mi or km). The mi or km value for TRIP
2 is displayed with the “TRIP 2” indication and unit of
measurement.
When the reading exceeds the maximum value of
9999.9 mi or 9999.9 km, distance is reset and the
meter automatically  counting from 0 again.
If  (4) is pressed when trip meter is displayed,
the instrument panel will activate the warning
"RESET ?" in place of the value and unit of
measurement. When this warning is active, Menu
scrolling is not possible.
If you press  (1) or (2), the instrument panel will
display TRIP 2 again, without  the value.
While if you press  (4), value for TRIP 2 will be
reset and the instrument panel will display TRIP 2 at
“0.0” followed by set unit of measurement.
The TRIP 2 counter is automatically reset in case the
system unit of measurement is changed manually or
 a  the counter will then  back
from zero, considering the new units of
measurement.
1
24
Fig 30
77