Ducati MULTISTRADA 950 - DQS and Gear Information; Ducati Quick Shift (DQS) Accessory

DQS - accessory
DQS function is an option.
If DQS is installed on the motorcycle, the instrument
panel displays DQS status as follows:
- if DQS system is enabled, the indication to
engage the gears "DQS – UP/DW" is displayed;
- if DQS system is in reduced  mode,
the indication to engage the gears "DQS –
UP/DW" is displayed flashing;
- if DQS system is disabled, "DQS –" is displayed;
- if the DQS system or the control unit is in fault,
the “DQS –” indication is displayed flashing.
The DQS with up/down feature allows the rider to
 and  without using the clutch lever.
It includes a two-way microswitch - built in the lever
mechanism - that outputs a signal to the engine
control unit whenever the  is operated.
The system works in a  way when 
and 
Here below are some tips that will ensure you
properly exploit this feature:
1) The Ducati Quick  takes the same  lever
operation as with vehicle not equipped with the
Ducati Quick  Ducati Quick  is not
designed for  automatically.
Fig 25
71