To reach adjuster (3) it is necessary to remove the
rider seat and cover (4) next to the
It is possible to work on adjuster (3) through the
opening on the
Turn adjusters (1) and (3) or knob (2) clockwise or
counter-clockwise respectively to or
the damping or the preload.
STANDARD
Loosen:
- adjuster (1) by 9 clicks from the fully closed
position;
- knob (2) by 8 clicks from the fully open position;
- adjuster (3) by 1.5 turns from the fully closed
position.
The shock absorber is filled with gas under
pressure and may cause severe damage if taken
by unskilled persons.
When carrying a passenger and luggage, set the rear
shock absorber spring to proper preload to improve
motorcycle handling and keep safe clearance from
the ground.
You may find that rebound damping needs adjusting
as well.
220
To Next Page
Loading...
