Disconnect connector (4) from bulb holder (5).
Rotate the bulb holder of the bulb to be replaced
counter clockwise and remove it. Replace the light
bulb with a new identical one.
Note
Be careful to hold the new bulb at the base
only. Never touch the transparent body with your
fingers or it will blacken resulting in reduced bulb
brilliancy.
Upon reassembly, rotate bulb holder (5) clockwise to
block it on the headlamp cover.
Reconnect the connector (4).
Note
To replace the LED parking light, contact a
Ducati authorised service centre.
Fig 213
253
To Next Page
Loading...
