signals, thereby optimising the of all these
systems, regardless of motorcycle position.
Power Mode
The Power Modes are the engine maps the
rider can select to change power level and delivery to
suit his/her own riding style and conditions.
There are three Power Modes, one for each Riding
Mode:
- LOW, with power delivery;
- MED, with power delivery;
- HIGH, with 'instant' power delivery.
Ride by Wire (RbW)
The Ride by Wire system is the electronic device that
controls opening and closing. Since there is
no mechanical connection between the
twistgrip and the bodies, the ECU can adjust
power delivery by directly opening
angle.
The Ride by Wire system allows you to obtain
power level and delivery according to the
selected Riding Mode (Power Mode), but even to
accurately control the engine brake (EBC), thereby
helping to control the rear wheel slipping (DTC).
Riding Mode
The rider can choose from 4 preset bike
configurations (Riding Modes) and pick the one that
best suits his/her riding style or ground conditions.
The Riding Modes allow the user to instantly change
the engine power delivery (Power Mode) and the
ABS and DTC
Available Riding Modes: Touring, Urban and
Enduro. Within every Riding Mode, the rider can
customise any
38
To Next Page
Loading...
