New Pin Code
●
Enter the menu.
●
Use (1) and (2) to select item “Pin Code”
and press the ENTER (3).
●
Select the "New Pin" item and press the ENTER
(3).
The display shows the message “New Pin” and the
spaces to enter the four digits of the new pin
(Fig 129). The two arrows above and below the first
digit give the possibility to set it. Entering the code:
●
Use (1) and (2) to increase and decrease
by 1 the value from “0” to “9”.
●
Press the ENTER (3) to confirm the digit
and move on to the following digit.
●
Repeat the procedure until entering all 4 digits.
Fig 128
Fig 129
192