Date (date
●
Enter the menu.
●
Use (1) and (2) to select item “Date and
time” and press the ENTER (3).
●
Select the "Date" option and press the ENTER
(3).
●
“Set...” is displayed on the right side while the
year flashes at the centre. Set the year using
(1) and (2).
●
Press the ENTER (3) to confirm the year.
●
The month flashes. Set the month using
(1) and (2).
●
Press the ENTER (3) to confirm the
month.
●
The day flashes. Set the day using (1)
and (2).
●
Press the ENTER (3) to confirm the day
and save set date.
If date is not correct, the instrument panel will
display "Wrong" for 3 seconds and then it will
automatically go back to the year and
repeat date
2022 / 01 / 18Date
...
Set...
Fig 146
205