Time (time
●
Enter the menu.
●
Use (1) and (2) to select item “Date and
time” and press the ENTER (3).
●
Select the "Time" option and press the ENTER
(3).
●
“Set...” is displayed on the right side while “AM”
or “PM” flashes at the centre. Set the parameter
using (1) and (2).
●
Press the ENTER (3) to confirm.
●
The hour flashes. Set the time using (1)
and (2).
●
Press the ENTER (3) to confirm.
●
The minutes flash. Set the minutes using
(1) and (2).
●
Press the ENTER (3) to confirm and save
set time.
Fig 147
206
To Next Page
Loading...
