Search and pairing of a new device
To the "Pairing" procedure of one or more
Bluetooth devices it is necessary to set the device to
ensure it can be detected by the control unit, so turn
device on and make it visible to other devices.
A Bluetooth device in visible mode transmits a
wireless signal allowing it to be detected by other
devices. This function is called pairing mode.
The motorcycle can be equipped with a Bluetooth
control unit that works as a hub between the various
electronic devices relying on a Bluetooth
communication
Note
Maximum of 2 1 rider earphone, 1
passenger earphone, 1 satellite navigator can be
paired up.
and Bluetooth Headset device
manufacturers may incorporate changes
within the standard protocols over the course of the
lifecycle of the device and
Earphones).
These changes are outside the control of
Ducati and may result in and Bluetooth
Headset devices functionality becoming impaired
(sharing Music, multimedia player, etc.) and may
equally some types of
(depending on Bluetooth profiles). This is
why Ducati cannot guarantee multimedia player
proper operation for:
1) the entire range of headphones and
available on the market;
2) that do not the required
Bluetooth profiles.
Check that your the following
profiles:
●
MAP profile: for a correct display of SMS and
MMS notifications;
●
PBAP profile: for a correct display of the
contact list.
20
To Next Page
Loading...
