If the teach-in procedure is completed correctly, the
instrument panel shows “Completed” followed by
the previous menu a few seconds.
The procedure can be by holding (1)
pressed for a long time: in this case the instrument
panel displays all previous information, replacing
message "In progress" with message
followed by the previous menu a few seconds.
If during the calibration procedure the required
speed and gear conditions are not maintained, or an
error or malfunction occurs, the instrument panel
displays the message "Failed" and a few
seconds returns to the previous menu.
Completed
Keep Speed
49 - 51 km/h
and Gear 2
Tyre Setting
Sport
50
2
Gear
km/h
Fig 152
209
To Next Page
Loading...
