Speed
●
Enter the menu.
●
Use (1) and (2) to select item “Units” and
press the ENTER (3).
●
Select the "Speed" option and press the ENTER
(3).
Options “km/h”, “mph” and “Default” are listed
(visible only if currently set unit of measurement is
not the default one). The currently set unit of
measurement is shown on the right side.
With (1) and (2) it is possible to select the
desired measurement or “Default” to reset the
default unit of measurement. Press ENTER (3) to
confirm.
To exit the menu and return to the previous screen,
select the “Back” item and press the ENTER
(3).
Speed
km/h
mph
...
...
km/h
Default
Back
Fig 160
217
To Next Page
Loading...
