Temperature
●
Enter the menu.
●
Use (1) and (2) to select item “Units” and
press the ENTER (3).
●
Select the "Temperature" option and press the
ENTER (3).
Options “°C”, “°F” and “Default” are listed (visible
only if currently set unit of measurement is not the
default one). The currently set unit of measurement
is shown on the right side.
With (1) and (2) it is possible to select the
desired measurement or “Default” to reset the
default unit of measurement. Press ENTER (3) to
confirm.
To exit the menu and return to the previous screen,
select the “Back” item and press the ENTER
(3).
Temperature
°C
°F
...
...
°C
Default
Back
Fig 161
218
To Next Page
Loading...
