Consumption
●
Enter the menu.
●
Use (1) and (2) to select item “Units” and
press the ENTER (3).
●
Select the "Consumption" option and press the
ENTER (3).
Options “l/100”, “km/l”, “mpg UK”, “mpg US” and
“Default” are listed (visible only if currently set unit
of measurement is not the default one). The
currently set unit of measurement is shown on the
right side.
With (1) and (2) it is possible to select the
desired measurement or “Default” to reset the
default unit of measurement. Press ENTER (3) to
confirm.
To exit the menu and return to the previous screen,
select the “Back” item and press the ENTER
(3).
Consumption
l/100
km/l
...
...
l/100
mpg UK
Back
Fig 162
219