Ducati PANIGALE V45 2021 - Page 248

 the 
Position the  in its seat.
Lay down the ABS positive cable (12), onto positive
cable (11) and  screw (8) on these cables.
Lay down the engine ground cable (10), onto
negative cable (9) and  screw (8) on these cables.
Tighten the terminal retaining screws (8).
Apply grease around the  terminals to
prevent oxidation.
Orient the cables as indicated.

The  gives  explosive gases; never
cause sparks or allow naked flames and 
near the  When charging the  ensure
that the working area is properly ventilated.
10
11
12 9
Fig 192
10
11
12 9
Fig 193
247