2-48
Chapter 2 Basic Operation
• If the booklets do not stack in a row with each booklet slightly overlapped on the stacker because of
their thickness and short length, make the conveyance start timing slower. If you set it to a positive
value, the timing will be slower.
How to adjust the operating time
• When a booklet is thick and does not go under the paper guide roller, make the operating time longer.
If you set it to a positive value, the operating time will be longer.
12. Starting Binding Operations
Press the start key of the upstream unit to start binding operations.
When a upstream is not connected, press the key of the DBM-600.
When using the PC CONTROLLER, refer to the PC CONTROLLER operation manual.