Duplo DBM-600T User Manual

6-1
Chapter 6 Appendix
Chapter 6 Appendix
1. Specifications
• Design and specications are subject to change without notice.
• Depending on system congurations, the environment under which the product can be operated and the
specication may be limited.
Model DBM-600 DBM-600T
Type Floor type
Paper size(*
1
) Saddle stitching and folding, folding without
stitching
Width: 105 to 364 mm /4.14 to 14.33 inches
Length: 170 to 640 mm/6.7 to 25.19 inches
Standard paper size: A5 SEF, A4 SEF+LEF,A4SR
SEF+LEF, A3 SEF, A3SR SEF, B5 SEF+LEF, B4
SEF+LEF, B3 SEF, LRG SEF, LGL SEF+LEF, LTR
SEF+LEF, STMT SEF
*The aspect ratio of non-standard size paper
should be within 1:3.1. (common for all the
binding methods)
*Depending on a paper size and paper
quality, even if the thickness of paper is less
than 1 mm/0.04 inch, dividing sheets into
subsets may be required.
*For sheet/sheet or when paper alignment
is poor, the use of the DBM-600 AIR KIT
(option) is necessary.
Width: 105 to 364 mm /4.14 to 14.33 inches
Length: 85 to 320 mm/3.35 to 12.60 inches
*The ratio of the width and length should be
1:1.5 or less.
Side stitching, side stitching and folding
B5 LEF, A4 SEF+LEF, A4SR SEF+LEF, LTR
SEF+LEF, LGL SEF+ LEF, B4 SEF+ LEF
Corner stitching
B5 LEF, A4 SEF+LEF, A4SR SEF+ LEF, LTR
SEF+LEF, LGL SEF+LEF, B4 SEF
Page insertion
Cover + inner sheets
A3 SEF+A4 LEF, LGR SEF+LTR LEF
Through
Width: 105 to 364 mm /4.14 to 14.33 inches
Length: 170 to 640 mm/6.7 to 25.19 inches
Finished size Maximum: width 364 x length 320 mm/14.33
x 12.60 inches
Minimum: width 105 x length 85 mm/4.14 x
3.35 inches
Width: 105 to 364 mm /4.13 to 14.33 inches
Length: 75 to 304 mm/2.95 to 11.96 inches
Infeed paper size
—
Width: 105 to 364 mm /4.14 to 14.33 inches
Length: 85 to 320 mm/3.35 to 12.60 inches

Duplo DBM-600T Specifications

General

Brand	Duplo
Model	DBM-600T
Category	Folding Machines
Language	English