Duplo DBM-600T User Manual

6-4
Chapter 6 Appendix
Model DBM-600 DBM-600T
The maximum
thickness of a set that
can be sent
Saddle stitching
2.5 mm/0.10 inch or less
*ne quality paper 81.4 g/m²/22 lb
(80 g/m²/21 lb): 3.0 mm/0.12 inch or less
Saddle stitching
6.0 mm/0.24 inch (there is a limitation
depending on the paper size and quality)
Side and corner stitching
A4 LEF, A4SR LEF, LTR LEF with ne quality
paper 81.4 g/m²/22 lb (80 g/m²/21 lb): 5.0
mm/0.20 inch or less
Other than the above: 3.0 mm/0.12 inch or
less
Folding without stitching, side stitching and
folding
Same as the saddle stitching
*For side stitching and folding, a stitch may
be deformed depending on the number of
sheets and paper quality.
Page insertion
0.6 mm/0.20 inch or less
Stitcher head Hohner 43/6S —
The number of
stitches
0 to 2 (4 stitches are available using an
optional kit.)
—
Paper conveyance
position
Center
Paper alignment
method
Align in three directions
—
Folding method Twin rollers, knife method —
Trimming method — Upper knife (movable), lower knife (xed)
Ocuts removal
method
— Ejected by fan
Space for ocuts — Outside the machine, oor type, full detection
Paper receiving
method for saddle
stitching and folding
Belt stacker
No full detection
Paper receiving
method for side
stitching
Drop method
Full detection
—
Paper receiving
method
Sheet/sheet, set/set Set/set

Duplo DBM-600T Specifications

General

Brand	Duplo
Model	DBM-600T
Category	Folding Machines
Language	English