Dymo Label v.8 - Viewing the Status of Your Label Maker

Viewing the Status of Your Label Maker
into the following default folder:
...\Libraries\Documents\DYMO Label\Labels
You can open all of your Version 7 LabelWriter label files with DYMO Label v.8.
However, DYMO Label v.8 cannot open tape labels created in earlier versions of the
software.
Viewing the Status of Your Label Maker
If you have a LabelManager 420P or LabelManager PnP label maker connected to your
computer, the label maker status is displayed in the Print area.
The following table describes the possible states of the label maker.
Label maker is connected and battery is charging.
Label maker is connected and battery is not
charging
Label maker is not connected or is turned off.
Label maker is connected and there is a problem
with the battery.
29