DynaGen GSC400 Series - Page 37

37 of 105
Not In Auto Red Solid Red A solid red illuminated LED represents a
Not in Auto condition.
Low Coolant Red
Amber
Solid Red
Solid Amber
A solid red illuminated LED represents a
Low Coolant (Temperature and/or Level)
failure condition.
A solid yellow illuminated LED
represents a Low Coolant Temperature
Warning condition
Pre-Heat Green Solid Green A solid green illuminated LED represents
an active Pre-Heat condition.
EPS
Supplying
Load
Green
Red
Solid Green
Solid Red
A solid green illuminated LED indicates
that the generator is supplying load and is
operating normally.
A solid red indicates load is detected on
the generator when none should be.
See section 5.11.2 on page 39 for more
information about EPS Supplying Load.
Failure Red Solid Red A solid red illuminated LED represents a
general Failure condition.