9000X AF Drives User Manual
MN04001004E
For more information visit: www.eaton.com A-27
June 2009
EMC Capability
General
For products used within the European Community (EC), the Electro Magnetic Compatibility
(EMC) directive states that the electrical equipment must not disturb the environment and
must be immune to other Electro Magnetic Disturbances in the environment.
The design intent was to develop a family of drives, which is user friendly and cost effective,
while fulfilling the user’s needs. EMC compliance was a major consideration from the outset
of the design.
The SVX9000/SPX9000 drive series is targeted at the world market. To ensure maximum
flexibility, yet meet the EMC needs of different regions, all drives meet the highest immunity
levels, while emission levels meet the requirements noted in the following section.
EMC Classification
The SVX9000/SPX9000 drive series are EMC classification H capable.
Class H
SVX9000/SPX9000 drives have been designed to fulfill the requirements of the product
standard EN 61800-3+A11 for the 1st environment restricted distribution and the 2nd
environment.
The emission levels correspond to the requirements of EN 61000-6-4.
SVX9000/SPX9000 series drives fulfill all applicable EMC immunity requirements (standards
EN 61000-6-1, EN 61000-6-2 and EN 61800-3+A11).
Declaration of Conformity
The Manufacturer’s Declarations of Conformity assuring the compliance of the SVX9000/
SPX9000 drives with the European Community (EC) EMC-directives is available upon
request.
To Next Page
Loading...
