Eaton 9000X - Figure C-22: F36 - Control Unit; Figure C-23: F37 - Device Change (Indication Only)

9000X AF Drives User Manual
MN04001004E
For more information visit: www.eaton.com C-21
June 2009
F36 — Control Unit
Figure C-22: F36 — Control Unit
F37 — Device Change
Figure C-23: F37 — Device Change (Indication Only)
F36
F36 ?
No
Yes
Reset the fault
Test and/or replace control board
with functioning one according to
instructions in service manual.
Replace defective parts as
recommended in spare parts lists.
Clear fault memory
F37
Reset the fault
Clear fault memory
Note: F37 should appear when same
type of power unit and/or option
board have been changed.
Note: Faulty board is displayed
on panel bottom line
1 = Control card A = Slot A
2 = Control unit B = Slot B
3 = Power card C = Slot C
4 = Power unit D = Slot D
5 = Adapter card E = Slot E