Eaton 9000X - Figure 5-3: Parameter Menu Structure Example

9000X AF Drives User Manual
MN04001004E
For more information visit: www.eaton.com 5-5
June 2009
Parameter Menu (M1)
The Parameter Menu is a single or multi-level menu dependent upon the application in use,
arranged by the parameter group items. Figure 5-3 illustrates this for the Standard
application. Parameters and parameter groups are explained in further detail in the
appropriate application manual.
Figure 5-3: Parameter Menu Structure Example
G1.1 Basic Parameters
G1.2 Input Signals
G1.3 Output Signals
G1.6 Motor Control
G1.7 Protections
G1.8 Auto Restart
P1.1.1 Minimum Frequency
. . .
. . .
P1.2.1 Start/Stop Logic
P1.2.2 DIN3 Function
P1.2.9 AI2 Signal Select
P1.3.1 A1out Signal
P1.7.1 4mA Input Fault
P1.7.2 4mA Fault Frequency
. . .
P1.1.16 Preset Speed 1
P1.6.1 Motor Control Mode
. . .
P1.6.13 Identification
P1.8.1 Wait Time
P1.8.2 Trial Time
. . .
P1.8.10 Underload Tries
+
+
+
+
+
P1.3.2 A1out Content
P1.3.17 A2out Scale
. . .
P1.4.1 Ramp 1 Shape
P1.4.2 Ramp 2 Shape
P1.4.13 Flux Brake Current
. . .
P1.7.23 Slot Comm Fault Response
P1.1.2 Maximum Frequency
+
+
M1 Parameters Menu
P1.6.2 V/Hz Optimization
G1.5 Skip Frequency
P1.5.1 Skip F1 Low Limit
P1.5.2 Skip F1 High Limit
P1.5.3 PH Accel/Decel Ramp
+
G1.4 Drive Control