Eaton 9000X - Figure 3-3: Ground Terminal Locations; Figure 3-4: Cable Protection Plate

9000X AF Drives User Manual
3-10 For more information visit: www.eaton.com
MN04001004E
June 2009
Figure 3-3: Ground Terminal Locations
8. If shielded cable is not used, check the connection of the ground cable to the motor, the
SVX9000/SPX9000 drive and the input line power terminals marked with .
9. Attach the wiring plate with the screws provided. Ensure that no wires are trapped
between the frame and the wiring plate.
10. Insert the rubber grommets supplied into the wiring plate holes that have not been
used, as illustrated in Figure 3-4.
Figure 3-4: Cable Protection Plate