Eaton 9000X - Page 81

9000X AF Drives User Manual
MN04001004E
For more information visit: www.eaton.com A-3
June 2009
Table A-1: SVX9000/SPX9000 Drive Specifications (Continued)
Description Specification
Control Characteristics
Control Method SVX Frequency Control (V/f)
SVX Open Loop Sensorless Vector
SPX Open Loop Sensorless Vector Control
SPX Closed Loop Control
Switching Frequency Adjustable with Parameter 2.6.9
208 – 230V: 3/4 – 15 hp: 1 to 16 kHz; default 10 kHz
20 – 30 hp: 1 to 10 kHz; default 3.6 kHz
380 – 500V: 1 – 30 hp: 1 to 16 kHz; default 10 kHz
40 – 200 hp: 1 to 10 kHz; default 3.6 kHz
525 – 690V All Sizes: 1 to 6 kHz; default 1.5 kHz
Frequency Reference Analog Input: Resolution 0.1% (10-bit), accuracy ±1%
Panel Reference: Resolution 0.01 Hz
Field Weakening Point 30 to 320 Hz
Acceleration Time 0.1 to 3000 sec.
Deceleration Time 0.1 to 3000 sec.
Braking Torque DC brake: 15% to 150% x T
n
(without brake option)
Environment
Ambient Operating Temperature 14°F (-10°C), no frost to 122°F (+50°C)
Storage Temperature -40°F (-40°C) to 158°F (70°C)
Relative Humidity 0 to 95% RH, non-condensing, non-corrosive, no dripping water
Air Quality Chemical vapors: IEC 60721-3-3, unit in operation, class 3C2
Mechanical particles: IEC 60721-3-3, unit in operation, class 3S2
Altitude 100% load capacity (no derating) up to 3300 ft. (1000m);
1% derating for each 330 ft. (100m) above 3300 ft. (1000m);
max. 10000 ft. (3000m)
Vibration EN 50178, EN 60068-2-6
5 to 50 Hz, displacement amplitude 1 mm (peak) at 3 to 15.8 Hz,
Max. acceleration amplitude 1 G at 15.8 to 150 Hz
Shock EN 50178, EN 60068-2-27
UPS Drop test (for applicable UPS weights)
Storage and shipping: max. 15 G, 11 mS (in package)
Enclosure Class NEMA 1/IP21 available all ratings
NEMA 12/IP54 available all ratings
Standards
EMC (at default settings) Immunity: Fulfils all EMC immunity requirements
Emissions: EN 61800-3
Safety UL 508C
Product IEC 61800-2
Control Connections
Analog Input Voltage 0 to 10V, R – 200 kΩ differential (-10 to 10V joystick control)
Resolution 0.1%; accuracy ±1%
Analog Input Current 0(4) to 20 mA; R
i
– 250Ω differential
Digital Inputs (6) Positive or negative logic; 18 to 24V DC
Auxiliary Voltage +24V ±15%, max. 250 mA
Output Reference Voltage +10V +3%, max. load 10 mA