88
Copyright © 2021 Eaton Corporation plc. All rights reserved.
Figure 6-3: Parts of the Touch Screen
Figure 6-4: Sign In or Password Request Screen
A
The UPS status area automatically displays the Eaton model number, current time and date, active
alarms, active notices, and load percent and battery run time for the UPS. If the Environmental
Monitoring Probe is installed, the temperature and humidity sensed by the probe will also be
displayed.
The small head symbol between the system model and time allows the operator select a dierent
language from an imbedded list.
The top line of the display blinks while scrolling when the system needs attention. Some notices
and alarms may be accompanied by an audible horn. To silence the horn, touch anywhere on the
control panel once. For more information about alarms and notices, see Section
6.2.7 System
Events
.
B
The information area contains data about UPS status and operations.
C
After touching the padlock in the upper right corner, the numerical keypad appears to allow entry of
the system access pass code for operation. See the following
Table 6-3
.
D
The padlock number indicates security level 0 - 3.
E
ENTER button.
To Next Page
Loading...
