Eaton 93PR - Instruction for Removing the UPM Module Packaging; Figure 4-6: Instruction for Removing the UPM Module Packaging

To Next Page

To Previous Page

Eaton 93PR 60-1200 kW UPS

Installation and Operation Manual

4.3. Instruction for Removing the UPM Module Packaging

1. Cut o󰀨 the packing strap and open the carton;

2. Lift the foam on the UPM module upward to remove them;

3. Take out the UPM module.

NOTE

The UPS is heavy. It requires two people for transportation due to its weight.

NOTE

Check whether the UPS is damaged during the process of transportation or not. Should any

damage be observed or parts be found missing, do not start the machine. Contact the forwarder

and distributor immediately.

Figure 4-6: Instruction for Removing the UPM Module Packaging

Other manuals for Eaton 93PR