46
Copyright © 2021 Eaton Corporation plc. All rights reserved.
4.4. Instruction for Removing th
e Top Exhaust Accessory P
ackaging
1. Cut o the packing strap and open the carton;
2. Lift the foam on the UPM module upward to remove them;
3. Take out the Top Exhaust Accessory and screws.
NOTE
Check whether the Top Exhaust Accessory is damaged during the process of transportation or
not. Should any damage be observed or parts be found missing, do not start the machine. Contact
the forwarder and distributor immediately.
Figure 4-7: Instruction for Removing the Top Exhaust Accessory Packaging
To Next Page
Loading...
